CWF Arcadian Flashlight - Sakura (Purple / Bronze Ano) Quantum Dragon

Don’t miss this opportunity to own a premium, feature-packed CWF Arcadian flashlight with everything you need for a customized lighting experience!

Finish: Titanium with our laser engraved Sakura artwork given a purple bronze anodized treatment. Includes a complementing titanium clip 

Made in the USA

Features:

• Quantum Dragon Engine
• 4500k emitter
• Adjustable power levels
• Triple-tap strobe function
• Thermal regulation
• Voltage protection

Specs:

• Powered by an 18350 battery,
• 0.99 inches in diameter x 3.5 inches in length
• Customizable function sets

Enter Configuration mode: 

Quickly momentary cycle (half tap) the switch 10+ times until it starts to rapidly flash. The light will then turn solid and start to ramp down.

• To select and option mode, keep holding the half press, allowing the ramp down to complete. Once the ramp down completes, the light will flash 3 times (one of each color) then enter the selected option mode. If no option mode is selected, the light will enter option mode 1.
  
• To cycle to the next option mode (options 2 - 4), during the ramp down release and again quickly half tap the switch. 
  

Option 1 = Mode group 

After entering option 1 mode, the light will flash the group number in a white light followed by a 3 flashes (one of each color). To select the desired mode group, release the switch during the 3 color sequence following the group number. 

• Mode Groups:
  * Group 1: Color, ML, 5%, 15%, 35%, 50%, 100%
  * Group 2: Color, ML, 35%, 100%
  * Group 3: ML, 5%, 15%, 35%, 50%, 100%
  * Group 4: ML, 5%, 15%, 100%
  * Group 5: ML, 15%, 100%
  * Group 6: 5%, 15%, 35%, 50%, 100%
  * Group 7: 15%, 100%
  * Group 8: 15% - 50%
  * Group 9: 100% Only
  * Group 10: Color, 100%
  * Group 11: 100%, Color
  * Group 12: Color, 50%
  * Group 13: 50%, Color
  

Option 2 = Secondary color choice

After entering option two mode, the light will flash each color 8 times, then move to the next color. To select a color, release the switch while the light is flashing the desired color.

Option 3 = Memory on/off

After entering option 3 mode, the light will quickly flash red then quickly flash green. Release the switch while flashing red to select memory off and green to select memory on.

Option 4 = Strobe option

After entering option 3 mode, the light will flash each color several times. Toi select a strobe mode, release the switch while flashing the desired color

• Red = off 
• Green = standard strobe 
• Blue = bicycle mode

To access strobe modes, half press the switch rapidly three times while in normal use.