Don’t miss this opportunity to own a premium, feature-packed CWF Arcadian flashlight with everything you need for a customized lighting experience!
Finish: Titanium with our laser engraved Robot Heart artwork given a blue anodized treatment. Includes a complementing titanium clip
Made in the USA
Features:
- Quantum Dragon Engine
- 4500k emitter
- Adjustable power levels
- Triple-tap strobe function
- Thermal regulation
- Voltage protection
Specs:
- Powered by an 18350 battery,
- 0.99 inches in diameter x 3.5 inches in length
- Customizable function sets
Enter Configuration mode:
Quickly momentary cycle (half tap) the switch 10+ times until it starts to rapidly flash. The light will then turn solid and start to ramp down.
-
To select and option mode, keep holding the half press, allowing the ramp down to complete. Once the ramp down completes, the light will flash 3 times (one of each color) then enter the selected option mode. If no option mode is selected, the light will enter option mode 1.
- To cycle to the next option mode (options 2 - 4), during the ramp down release and again quickly half tap the switch.
Option 1 = Mode group
After entering option 1 mode, the light will flash the group number in a white light followed by a 3 flashes (one of each color). To select the desired mode group, release the switch during the 3 color sequence following the group number.
-
Mode Groups:
* Group 1: Color, ML, 5%, 15%, 35%, 50%, 100%
* Group 2: Color, ML, 35%, 100%
* Group 3: ML, 5%, 15%, 35%, 50%, 100%
* Group 4: ML, 5%, 15%, 100%
* Group 5: ML, 15%, 100%
* Group 6: 5%, 15%, 35%, 50%, 100%
* Group 7: 15%, 100%
* Group 8: 15% - 50%
* Group 9: 100% Only
* Group 10: Color, 100%
* Group 11: 100%, Color
* Group 12: Color, 50%
* Group 13: 50%, Color
Option 2 = Secondary color choice
After entering option two mode, the light will flash each color 8 times, then move to the next color. To select a color, release the switch while the light is flashing the desired color.
Option 3 = Memory on/off
After entering option 3 mode, the light will quickly flash red then quickly flash green. Release the switch while flashing red to select memory off and green to select memory on.
Option 4 = Strobe option
After entering option 3 mode, the light will flash each color several times. Toi select a strobe mode, release the switch while flashing the desired color
- Red = off
- Green = standard strobe
- Blue = bicycle mode
To access strobe modes, half press the switch rapidly three times while in normal use.
